buji
發表於 2013-12-30 12:48
價錢好吸引
(Post76 Android 手機版送出)
kenchui
發表於 2013-12-30 17:06
好吸引!! {:1_335:}
warmmjs
發表於 2013-12-30 23:35
samuel8892000 發表於 2013-12-30 11:10 static/image/common/back.gif
仲有 W記至少有一年保養及十天有壞包換.E毛仔有事就食自已.祝你好運.
Ching 他有5年保養,有一壞就send 去美國整啦~講真我對Emotiva 有信心多些。W仔去website 都無report, 但Emotiva 外國超多人用,多report到爆
ANWKLO
發表於 2013-12-31 13:23
mantam121 發表於 2013-12-29 11:45 static/image/common/back.gif
我訂左部UMC-200.運費US$88.
DC-1 重 1.2Kg都要Freight: $71.79 UPS Worldwide
UMC-200.運費US$88 相對低
jason1969
發表於 2013-12-31 14:21
本帖最後由 jason1969 於 2013-12-31 15:01 編輯
bigair 發表於 2013-12-29 12:17 static/image/common/back.gif
我見佢有mono amp,用係2ch唔知好唔好聲呢
mono Amp 好似好正{:6_193:}
XPR-1
Mono-block Reference Power Amplifier
Specifications
Topology: Fully discrete, quad differential, fully balanced, high current, short signal path Class A/B Differential Reference power amplifier with Optimized Class-H™ power supply topology.
Number of Channels: 1
Power Output
(rated power; THD < 0.1%):
1000 watts; into 8 Ohms.
1,750 watts into 4 Ohms.
Rated Power Bandwidth (at rated power; 8 Ohm load): 20 Hz to 20 kHz + /- 0.1 dB.
Minimum Recommended Load Impedance: 4 Ohms.
Frequency Response: 5 Hz to 80 kHz (+ 0 / - 3 dB).
THD + noise: < 0.0025%
Signal to Noise Ratio (8 Ohm load):
> 118 dB at rated power (A-weighted).
> 93 dB at 1 watt (A-weighted).
Damping Factor (8 Ohm load): > 1,000
Speaker Output Connections:
Super heavy-duty custom Emotiva speaker binding posts - with clear acrylic insulators and heavy duty gold plated contacts; designed to accept heavy-gauge bare cables, lugs, or banana plugs.
Power Supply:
2.5 kVA toroidal power transformer.
240,000 uF low ESR capacitor bank.
Input sensitivity (for rated power; 8 Ohm load):3.5 V
Gain: 29 dB
Input Connections:
(1) RCA; unbalanced (audiophile quality, solid brass, machined, gold plated)
Balanced (XLR); one per channel.
(1) XLR; balanced
Input Impedance:
100k Ohms (unbalanced).
51k Ohms (balanced).
Trigger:
Trigger Input: 5 - 20 V (AC or DC); <10 mA input current required.
Trigger Output: 12 VDC; can drive any load up to 50 mA.
Power Requirements: 115 VAC or 230 VAC +/- 10% @ 50 / 60 Hz (user selectable).
The XPR-1 requires a 20 Amp circuit and standard IEC 20 Amp outlet (which is different than a 15 Amp outlet). If you don’t have a proper circuit and outlet. We recommend you have one installed by a qualified electrician. We recommend that the XPR-1 be plugged into its own dedicated 20 Amp circuit.
Protection: The XPR-1 is protected against excessive operating temperature, shorted speaker connections, ground faults, and other common fault conditions. If a fault occurs the LED above the Standby button, and the Channel Status LED and the LED Bargraph Meter LEDs will flash red. Returning the XPR-1 to Standby or switching off the AC Power will reset the protection circuitry.
Dimensions:
unboxed: 17" wide x 9.5" high x 19.5" deep (includes feet and binding posts; requires additional 3-4" of depth clearance to accomodate the power cord).
(double) boxed: 27" length x 25" width x 16" height
Weight: 99 lbs (net); 113 lbs (boxed)
bigair
發表於 2013-12-31 15:13
jason1969 發表於 2013-12-31 14:21 static/image/common/back.gif
mono Amp 好似好正
XPR-1
Power絕對夠用,唔知聲底如何呢{:6_178:}
jason1969
發表於 2013-12-31 15:22
bigair 發表於 2013-12-31 15:13 static/image/common/back.gif
Power絕對夠用,唔知聲底如何呢
力大無比 8ohms 1000w{:6_193:}價錢可以接受, 我都係想知咩聲底{:8_375:}
小瑟
發表於 2013-12-31 15:42
ANWKLO 發表於 2013-12-29 09:59 static/image/common/back.gif
多數人買power amp, 為何好少人買DAC
XDA-2
部 Stealth DC-1 好吸引咁喎~~~~
ANWKLO
發表於 2013-12-31 17:44
小瑟 發表於 2013-12-31 15:42 static/image/common/back.gif
部 Stealth DC-1 好吸引咁喎~~~~
Head-Fi的用家幾好評價
yan5137
發表於 2014-1-1 00:32
warmmjs 發表於 2013-12-29 14:21
你衹需要上emotiva.com 在contact us 有 問你要什麼model 及要送到Hk .他們就會連FedEX 的運費send email ...
師兄我開左paypal户囗,emotiva報左價比我,但我唔識點過數比佢,有冇師兄可以指點我!