請問由Dac Magic入Onkyo 606用咩線最好聲呢?
本身source係電腦經usb去dac magic...咁...由dac magic 入 onkyo 606... 應該用 rca 定係 optical 呢?
請師兄指教! 本身source係電腦經usb去dac magic...
咁...由dac magic 入 onkyo 606... 應該用 rca 定係 optical 呢?
請師兄指教!
ZooKeeper 發表於 2009-8-11 17:19 http://www.post76.com/discuss/images/common/back.gif
optical.................. I prefer coaxial 用得 DAC 當然用 Analog output, 即 RCA or Balance (XLR) 做 output
copy from DAC Magic user manual:
http://www.cambridgeaudio.com/assets/documents/AP239051DacMagicUserManual01English.pdf
-----------------------------------------
Digital Outputs
The digital outputs allow a digital recording device to be connected. These outputs loop or passthrough unprocessed digital audio from the selected digital input. Two types are available (both the co-axial and the optical are active concurrently and can be used to connect and run equipment at the same time):
S/P DIF co-axial – to obtain best results, use a high quality 75 ohm digital RCA interconnect cable (not one designed for normal audio use).
TOSLINK optical – use a high quality TOSLINK fibre-optic interconnect cable designed specifically for audio use. To achieve the best results we always recommend using high quality Cambridge Audio leads, which are guaranteed for life.
Note: These outputs are pass-through only; there is no upsampling or any other modification done to the LPCM input signal. Sorry...我誤會左係CD player去DAC magic....如果DAC magic去606一定係RCA or XLR...唔係部DAC magic要嚟做咩{:1_253:} 明白晒... 唔該咁多位師兄! {:6_195:}
頁:
[1]