請教有用JL Audio玩雙sub-woofer的朋友
本帖最後由 chhanthony 於 2013-10-11 14:38 編輯請問各位有否用JL Audio Sub-woofer後嘅XLR output去畀另一隻sub-woofer呢?
去另一隻sub-woofer是否會受ARO所影響?
謝謝 Found in user manual thank you
From the Fathom operating in “Master” mode, the “Output to Slave” signal
carries any signal processing selected on the Master Fathom (including the
Master Level setting and A.R.O. processing) to further Fathoms operating in
“Slave” mode. “Slave” subwoofer signal processing and level controls will be
inoperable. In this mode, the user does not have to worry about level, crossover,
and other settings for the slave subwoofers.
理論上係得，不過未試過
又或者可以加個一出二頭 本帖最後由 chhanthony 於 2013-10-11 15:33 編輯
bigair 發表於 2013-10-11 15:01 static/image/common/back.gif
理論上係得，不過未試過
又或者可以加個一出二頭
我係concern 個output會唔會受 ARO所影響，
原來喺user manual度寫咗經JL Audio Subwoofer output嘅signal係會受ARO所影響的。
今日去鴨記揾一出二嘅XLR頭，但只揾到作1.5M長嘅XLR Cable. chhanthony 發表於 2013-10-11 15:31 static/image/common/back.gif
我係concern 個output會唔會受 ARO所影響，
原來喺user manual度寫咗經JL Audio Subwoofer output嘅signa ...
可能要自己做喎，我見q姐有用RCA 1出2，佢話無乜衰減 bigair 發表於 2013-10-11 15:40 static/image/common/back.gif
可能要自己做喎，我見q姐有用RCA 1出2，佢話無乜衰減
問咗秋記手工$300 料另計，同時駁兩個devices抗阻應該有啲唔同。 chhanthony 發表於 2013-10-11 15:54 static/image/common/back.gif
問咗秋記手工$300 料另計，同時駁兩個devices抗阻應該有啲唔同。
如果用係十仔應該好d，我估木耳係聽唔出的 bigair 發表於 2013-10-11 16:05 static/image/common/back.gif
如果用係十仔應該好d，我估木耳係聽唔出的
我一個用邊駁sub-woofer另一邊駁bass shakter個class D amplifier chhanthony 發表於 2013-10-11 16:14 static/image/common/back.gif
我一個用邊駁sub-woofer另一邊駁bass shakter個class D amplifier
十仔唔夠震？{:6_138:} bigair 發表於 2013-10-11 16:19 static/image/common/back.gif
十仔唔夠震？
功力差，無計{:1_263:}
頁:
[1]
2