論壇 › 家庭影院 › Pioneer 921K 死底版, 邊度整平d?

kelvinhin 發表於 2013-9-3 14:22

Pioneer 921K 死底版, 邊度整平d?

部Pioneer 921K用左兩年, 最近出現UE22死機畫面. 拿去cs問下整要幾錢, 佢話要換底版, 二千幾. 唔知出面有冇人可以整到? 因為我依家手頭較緊, 二千幾去整感覺上真係唔太值. 唔知其他用Pioneer amp的師兄有冇出現過UE22 error問題?

sevenstar 發表於 2013-9-3 16:13

師兄換機算啦，個底板都二千幾
而家同級新機都係4xxx
確實唔化算

kelvinhin 發表於 2013-9-3 17:33

sevenstar 發表於 2013-9-3 16:13 static/image/common/back.gif
師兄換機算啦，個底板都二千幾
而家同級新機都係4xxx
確實唔化算

最弊條屍唔知有冇人收...

yuppi 發表於 2013-9-3 17:35

kelvinhin 發表於 2013-9-3 17:33 static/image/common/back.gif
最弊條屍唔知有冇人收...

冇人收咪掉咗佢囉

kelvinhin 發表於 2013-9-3 19:13

yuppi 發表於 2013-9-3 17:35 static/image/common/back.gif
冇人收咪掉咗佢囉

如果有人可以用千餘蚊收左條屍, 咁我會考慮換機. 但如果冇人收, 就會決定整.

billymud 發表於 2013-9-3 19:18

kelvinhin 發表於 2013-9-3 19:13 static/image/common/back.gif
如果有人可以用千餘蚊收左條屍, 咁我會考慮換機. 但如果冇人收, 就會決定整. ...

C-Hing,did u read these ??

<extracted>
UE22 , means an udate error .

try to update the firmware via USB.
try doing a full system RESET (power off, hold down endter on the front panel, power on)

kelvinhin 發表於 2013-9-3 19:23

billymud 發表於 2013-9-3 19:18 static/image/common/back.gif
C-Hing,did u read these ??




I had never update the amp before.

billymud 發表於 2013-9-3 19:28

kelvinhin 發表於 2013-9-3 19:23 static/image/common/back.gif
I had never update the amp before.

Well, reset to factory default , then update it as is.
why not ?? {:1_343:}
why didn't u update it's firmware before sending for a REPAIR ?....{:1_342:}

kelvinhin 發表於 2013-9-3 19:39

billymud 發表於 2013-9-3 19:28 static/image/common/back.gif
Well, reset to factory default , then update it as is.
why not ??
why didn't u update ...

咁拿返部機再攪攪software部份是否值得?

billymud 發表於 2013-9-3 19:51

kelvinhin 發表於 2013-9-3 19:39 static/image/common/back.gif
咁拿返部機再攪攪software部份是否值得?

值得 !

查看完整版本: Pioneer 921K 死底版, 邊度整平d?