論壇 › 家庭影院 › 用緊Oppo 103 請入~

Jeffyy 發表於 2013-5-20 08:52

用緊Oppo 103 請入~

想問下oppo 103 個聲畫唔同步問題搞掂未呢? 係唔係個個都有里個問題??

邊到買平D又信得過? 想入手...thanks{:8_387:}

littlesweet 發表於 2013-5-20 09:48

我之前問過價, 開$4300未講, 我諗而家又平d呱............. {:1_333:}

Jeffyy 發表於 2013-5-20 10:18

littlesweet 發表於 2013-5-20 09:48 static/image/common/back.gif
我之前問過價, 開$4300未講, 我諗而家又平d呱.............

師兄可否pm 我知邊間呀？thanks

Samson2011 發表於 2013-5-20 14:03

本帖最後由 Samson2011 於 2013-5-20 14:07 編輯

我上個月問友誠，最平都要$4,500
Oppo 應該係公價貨，無乜減價空間

Jeffyy 發表於 2013-5-20 14:09

Samson2011 發表於 2013-5-20 14:03 static/image/common/back.gif
我上個月問友誠，最平都要$4,500
Oppo 應該係公價貨，無乜減價空間

邊間呢?thanks ching

littlesweet 發表於 2013-5-20 14:10

本帖最後由 littlesweet 於 2013-5-20 14:13 編輯

我之前問過幾間在mk有賣103的舖, 最貴的 4450, 最平的 4300. {:1_254:}

都係如果有興趣, sales 話再減d咁................ 不過好似冇左送qed既hdmi........................... {:1_344:}



ching, 至於聲畫唔同步, 我用過5部 blu ray player, 都係咁................. 要部部教, 有時隻隻碟都要教................ {:1_345:}

raymond430 發表於 2013-5-20 14:36

我係第一批用家,聲畫唔同步嘅情況係早期明顯d,但期後update過兩次firmware之後,現在都唔太覺有問題.

Jeffyy 發表於 2013-5-20 14:50

raymond430 發表於 2013-5-20 14:36 static/image/common/back.gif
我係第一批用家,聲畫唔同步嘅情況係早期明顯d,但期後update過兩次firmware之後,現在都唔太覺有問題. ...

謝謝ching ! 你覺得部機好用嗎?? 駛唔髮駛成日左set 右set ?? {:8_366:}

MingSir 發表於 2013-5-20 15:23

New Firmware can solve this problem :

Added a feature that allows the adjustment of the audio delay time within the range of -100ms to +100ms. This can be set in "Setup Menu"->"Audio Processing" -> "A/V Sync", and the delayed time will be applied to all output terminals including HDMI 1 and 2, Coaxial, Optical, and 7.1 outputs (including the Stereo outputs of the BDP-105).

    The actual audio delay effect might be different for each of the output terminals due to the different audio process algorithms and signal paths used for each output. Please adjust this setting based on the actual output terminal in use.
    The negative adjustment values are for cancelling out the audio delay that the player automatically applies. Depending on the video source and the time it takes to process the video, the main decoder chip automatically applies an audio delay in order to optimize audio video synchronization. The negative manual settings reduce the automatic audio delay, while the positive manual settings apply additional delay. Any negative value setting beyond the player's automatic delay will be treated as completely cancelling the automatic delay. For example, if the "A/V Sync" value is manually set to -100ms and for the current video source the player applies a 70ms automatic audio delay, the final result is that the 70ms audio delay gets cancelled and the audio is not delayed at all. It is not possible to put audio ahead of video using this setting.
    For content sent through HDMI IN, the "A/V Sync" adjustment only works with positive values.

But , in return, you will lose some of the FUNCTIONS found in the previous firmware, so READ carefully before you make up your mind !

Jeffyy 發表於 2013-5-20 15:47

MingSir 發表於 2013-5-20 15:23 static/image/common/back.gif
New Firmware can solve this problem :

Added a feature that allows the adjustment of the audio delay ...

thanks ching{:8_387:}

查看完整版本: 用緊Oppo 103 請入~