I would like to share the setting for Panasonic's Plasma from http://www.highdefjunkies.com
Their mode (ST series) is difference from HK's and some of the setting is not available in HK model. However, personally, I think the setting isbetter then the original provided
North American TC-PxxST50 Reference Settings
*****Note: These settings are designed exclusively to be used on North American TC-PxxST50 displays after completing the Panel Prep procedure listed in post #1. Please do not use these settings unless you have follow post #1 100%*****
Picture
Picture Mode: Custom
Contrast: 76
Brightness: 56
Color: 43
Tint: 0
Sharpness: 0
Color Temp: Warm2
Photo Enhancement: Off
C.A.T.S: Off
Video NR: Off
Pro Settings
Colorspace: Normal
W/B High R: -7
W/B High G: 0
W/B High B: -2
W/B Low R: +12
W/B Low G: 0
W/B Low B: +3
Black Extension: 0
Gamma Adjustment: 2.6 (50/55" models) 2.4 (60/65" models)
Panel Brightness: Mid
Contour Emphasis: Off
AGC: 0
HDMI Settings
***Leave all settings in this menu at their default***
Advance Picture
Block NR: Off
Mosquito NR: Off
Motion Smoother: Off
Black Level: Light
3:2 PullDown: Auto
North American TC-PxxST50 Non Panel Prep User Settings
*****Note: These settings are designed for North American TC-PxxST50 owners who choose not to do the Panel Prep precedure listed in post #1. Use these setting immediately after taking the display out of the box.
*****IT IS HIGHLY RECOMMENDED YOU FOLLOW THE PANEL PREP PROCEDURE AND USE THE TC-PxxST50 REFERENCE SETTINGS DUE TO THE GRAYSCALE SHIFTING RED WITHIN THE FIRST 100 HOURS OF USE!!!!!!!!!!!!!!****
Picture
Picture Mode: Custom
Contrast: 78
Brightness: 56
Color: 45
Tint: 0
Sharpness: 0
Color Temp: Warm2
Photo Enhancement: Off
C.A.T.S: Off
Video NR: Off
Pro Settings
Colorspace: Normal
W/B High R: +1
W/B High G: 0
W/B High B: +2
W/B Low R: +12
W/B Low G: 0
W/B Low B: +4
Black Extension: 0
Gamma Adjustment: 2.6 (50/55" models) 2.4 (60/65" models)
Panel Brightness: Mid
Contour Emphasis: Off
AGC: 0
HDMI Settings
***Leave all settings in this menu at their default***
Advance Picture
Block NR: Off
Mosquito NR: Off
Motion Smoother: Off
Black Level: Light
3:2 PullDown: Auto
DIY 優化不求人{:6_183:}
lenon4ever 發表於 2013-5-20 14:40 static/image/common/back.gif
DIY 優化不求人
可隨意換上心愛的 PC
小瑟 發表於 2013-4-26 10:47 static/image/common/back.gif
星期一終於都的起心肝攪攪佢, 換左條PE LAB ST上去, 雖然之前用左紅銅畫面係實左同色深好左, 不過因為用左 ...
個架真係抵, 我上網搵到個連裝收我 $1100.
不過大王你拆個 plasma 易唔易, 兩條友攪唔攪得掂.?{:6_141:}
同埋你對 speaker 會唔會太近個 panel, 聽聞話會受磁.
我仍然努力搵緊水尾 VT50 {:6_136:}
lenon4ever 發表於 2013-5-20 14:40 static/image/common/back.gif
DIY 優化不求人
我都折左個扣呀, 不過你整塊亞加力落去, 有咩用途架呢??? 好似好骨子咁喎!!!
最衰我掛牆, D位死好多呢, 好多線都用唔到呀!!!
ivanyiu 發表於 2013-6-13 11:05 static/image/common/back.gif
個架真係抵, 我上網搵到個連裝收我 $1100.
不過大王你拆個 plasma 易唔易, 兩條友攪唔攪得掂.? ...
我折個PLASMA換線時, 只有我一條友攪架, 不過我係42"呀, 你50"就唔好勒~~~~
我又冇受磁既問題喎~~~~
小瑟 發表於 2013-6-13 15:46 static/image/common/back.gif
我都折左個扣呀, 不過你整塊亞加力落去, 有咩用途架呢??? 好似好骨子咁喎!!!
最衰我掛牆, D位死好多呢,...
直插背既話. 真係好多線都用唔到. 你知D發燒線幾咁粗同硬架啦. {:6_174:}
ivanyiu 發表於 2013-6-13 15:54 static/image/common/back.gif
直插背既話. 真係好多線都用唔到. 你知D發燒線幾咁粗同硬架啦.
係呀, 要用轉灣既IEC, 但條線粗D都入唔到呀陰公~~~~
ivanyiu 發表於 2013-6-13 11:05 static/image/common/back.gif
個架真係抵, 我上網搵到個連裝收我 $1100.
不過大王你拆個 plasma 易唔易, 兩條友攪唔攪得掂.? ...
我對前置放電視前面，都無受磁影響；其實舊式喇叭同CRT年代果陣就有，依家都好少話聽到有受磁出現！
我其實都好想問, 依家面板仲會有受磁既問題嗎?? 好似CRT先有架喎~~~
