PP-HK 發表於 2013-3-1 09:31 static/image/common/back.gif
一係就手動慢慢鋸, 唔係自己用機鋸多數爆邊。
thanks suggestion
HOHOHO 發表於 2013-3-1 11:20 static/image/common/back.gif
thanks suggestion!
ching don't tear off the plastic paper on both sides before cut!{:6_211:}
用手鋸好易脫㬵⋯隻手。
xianglan 發表於 2013-3-1 11:36 static/image/common/back.gif
ching don't tear off the plastic paper on both sides before cut!
IT IS AN OLD ONE, ALREADY NO plastic paper ..........
THANKS YOUR SUGGESTION!
YYSKY 發表於 2013-3-1 11:53 static/image/common/back.gif
用手鋸好易脫㬵⋯隻手。
Yes I can sure it!!!
xxijixx 發表於 2013-3-1 00:30 static/image/common/back.gif
3~4 mm好勉強,無咩經驗好易変九牙、易爆(忌心急),可以响邉位試吓先.
可以的話俾錢就快靚正 ...
唔好多過35度角，用鐵鋸長度有限同好易衰收尾(兩邊都要有托底)
xxijixx 發表於 2013-3-1 14:27 static/image/common/back.gif
唔好多過35度角，用鐵鋸長度有限同好易衰收尾(兩邊都要有托底)
best way is to use electric jig-saw..any way if use hand saw must watch at the end cut with parallel of the 'clear' board!
開亞加力膠多數用勾刀，自己做好難做得靚同平，多數2.5mm以上就會比人開料，
你可以問下新田地街橫街鋪，多數攞比佢都會幫你開$2-5一刀，一定靚過自己做，
大鋪就一定要幫佢買先會做$2一刀
xxijixx 發表於 2013-3-1 14:27 static/image/common/back.gif
唔好多過35度角，用鐵鋸長度有限同好易衰收尾(兩邊都要有托底)
唔好多過35度角......so profressional
hkmmo 發表於 2013-3-1 15:39 static/image/common/back.gif
開亞加力膠多數用勾刀，自己做好難做得靚同平，多數2.5mm以上就會比人開料，
你可以問下新田地街橫街鋪，多 ...
thank you good suggestion!
