leo25
發表於 2013-1-12 01:03
等睇表演 {:1_351:}
billymud
發表於 2013-1-12 01:39
itoy2008 發表於 2013-1-11 23:51 static/image/common/back.gif
try upload again...
CHing, if possible,should DIY it with 3 power supplies (i.e. one for the display panel, one for each channel )vor~~ {:1_262:}
portlandpsu
發表於 2013-1-12 04:22
本帖最後由 portlandpsu 於 2013-1-12 04:23 編輯
Finally just finished soldering and voltage check.But there is a little bit over on RCA output voltage.I will upload pictures later because it is 4:30 in the MORNING {:6_206:} .Have a good dream first. {:6_238:}
portlandpsu
發表於 2013-1-12 11:33
Maybe some 晶体管 {:6_129:}
itoy2008
發表於 2013-1-12 13:33
一流手工!Ching,繼續等睇表演^^
zoneaudio
發表於 2013-1-12 14:13
巧靚,開聲未?
portlandpsu
發表於 2013-1-12 16:49
Not Yet. Need to change some parts.Some 晶体管 were burnt out.
zoneaudio
發表於 2013-1-17 16:59
portlandpsu 發表於 2013-1-12 16:49 static/image/common/back.gif
Not Yet. Need to change some parts.Some 晶体管 were burnt out.
加油!!
portlandpsu
發表於 2013-1-19 01:30
部DAC1955mk2經過各方大帥修復后,終於可以出聲。但有一些問題再出現,個select制有問題要換。整好全部野我會上圖及報告。
corolladv
發表於 2013-1-19 01:37
DIY good {:6_193:}