mtv7000d 有冇方法可以recovery firmware ???
屋企人upgrade左之後開唔返機以前用3000都有得recovery 但係7000我睇說明書都冇寫
有冇師兄知點搞??? try recovery method as 5000D?
10.3 Rescue Procedure
(from firmware corruption)
If power has been interrupted during a firmware upgrade, or for some
other reason, the Magic TV™ firmware has become corrupt. You can
restore Magic TV™ using the following steps:
1. Visit www.magictv.com/en/support.html and find the newest version of
the firmware (MTV5000_(version-number).zip for example).
2. Extract the contents of the zip file and put all files into the root
directory of a USB storage device (a thumbdisk for example).
3. Insert the USB drive into one of the Magic TV™ USB ports.
4. MTV3xxx models only - After switching on Magic TV™, repeatedly
press (not holding it down).
MTV5xxx models only - Hold down the front panel Magic TV™ Button
while you switch on Magic TV™ using the rear panel On/Off switch.
5. Magic TV™ will enter Rescue Mode, and autodetect the firmware on
the USB drive.
6. If no firmware is found the front panel will show an error message.
Recheck that the firmware files are unzipped and in the root of the USB
drive and the USB drive is inserted correctly. Press to try again.
7. If firmware is found, the version number will be displayed on the front
panel. Press to proceed.
8. During the rescue process, the front panel will show “UPGRADING”
and the bars at the left-hand side will show progress.
9. After the rescue process has completed (normally around 2 minutes),
Magic TV™ will reboot automatically.
頁:
[1]