丁蟹
發表於 2012-11-11 15:30
sungyue 發表於 2012-11-11 15:26 static/image/common/back.gif
下星期可能去大伕到
大伕 {:1_342:}
sealteam4
發表於 2012-11-11 21:02
ckw3031 發表於 2012-11-10 20:52 static/image/common/back.gif
咁講即係部DAC跟本唔掂?如果係掂就唔駛加鐘。
一種附加玩法,mytek本身係錄音室器材公司,用開鐘,加鐘好聲D係正常
bigdish
發表於 2012-11-11 21:02
本帖最後由 bigdish 於 2012-11-11 21:08 編輯
有冇師兄試過Mytek個鐘呢?
http://www.mytekdigital.com/products/studioclock192.htm
或者有冇師兄用緊Apogee Big Ben, Antelope OCX / Trinity呢?
bigdish
發表於 2012-11-11 21:04
丁蟹 發表於 2012-11-11 09:43 static/image/common/back.gif
網友DIY
師兄可唔可以pm我仔個鐘既資料同價錢呢? 我都想玩鐘.
chhanthony
發表於 2012-11-11 21:15
bigdish 發表於 2012-11-11 21:02 static/image/common/back.gif
有冇師兄試過Mytek個鐘呢?
http://www.mytekdigital.com/products/studioclock192.htm
個jitters同Mytek入面果個都係<10ps好似加咗無乜so,
我希望遲下加隻 Antelope OCX玩下,一直都未諗到用咩方法可以將個clock sync晒source同DAC,
否則加鐘好似有啲雞勒,因為本身用Squeezebox Touch加同Sotm同notebook做source,
首先Sotm本身無得加鐘,所以玩Squeezebox加鐘只可以加落Mytek行word clock mode,
而Notebook行usb入Mytek 係唔support external clock,
如果要行external clock就要加個有clock in嘅DDC,
暫時只係見到Hiface EVO有得clock in,
但Hiface EVO只係support 44.1-192khz,咁即係播SACD時唔可以用佢。
一係直頭砌部PC加張有clock in嘅soundcard行AES
出真係好鬼煩{:6_187:}
丁蟹
發表於 2012-11-12 11:11
chhanthony 發表於 2012-11-11 21:15 static/image/common/back.gif
個jitters同Mytek入面果個都係
咁大鑊
我仲打算買個 SACD ISO 返黎玩
http://i24.photobucket.com/albums/c10/westwoodm/20121112_011422_HDR.jpg
丁蟹
發表於 2012-11-12 11:15
bigdish 發表於 2012-11-11 21:04 static/image/common/back.gif
師兄可唔可以pm我仔個鐘既資料同價錢呢? 我都想玩鐘.
黑色就係個DIY原子鐘
我覺得效果好明顯
至少覺得一分錢一分貨
始終玩HIFI好多時支出唔成正比
又要靠運氣買返黎配件與器材夾唔夾
http://i24.photobucket.com/albums/c10/westwoodm/20121112_010931_HDR.jpg
chhanthony
發表於 2012-11-12 11:26
丁蟹 發表於 2012-11-12 11:11 static/image/common/back.gif
咁大鑊
我仲打算買個 SACD ISO 返黎玩
要隻DDC同clock都support SD64, DSD128 + DXD clock rates先得
丁蟹
發表於 2012-11-12 11:32
chhanthony 發表於 2012-11-12 11:26 static/image/common/back.gif
要隻DDC同clock都support SD64, DSD128 + DXD clock rates先得
會唔會將 SACD ISO 轉為 AIFF 去解決呢 {:1_342:}
obee
發表於 2012-11-12 11:38
chhanthony 發表於 2012-11-11 21:15 static/image/common/back.gif
個jitters同Mytek入面果個都係
Anthony ching,
Think about using a PC with PCIe fiber to USB card.
And remove DDC, use Mytek directly (as it has USB), add a good clock.
This whole setup should have lot of improvement.