Marantz SR 5007 上前置啞了!
各位C兄,我初次玩上前置7.1就出事了! 部 Marantz SR 5007 上前置啞了.
怎樣事好? {:1_247:}
請幫幫小弟! Did you set "Assign mode" to "Front Height" ? Check manual p.81. Tried the speaker at other channels ? Swapped speaker cable ? 甘大獲!{:6_197:} beginners 發表於 2012-11-1 19:17 static/image/common/back.gif
Did you set "Assign mode" to "Front Height" ? Check manual p.81. Tried the speaker at other channels ...
多謝C兄回覆,
我突然想起上次 Set Audyssey 時,
Amp Assign 有 Set "Front Height"
Channel Select 就跳過了, 請問這裏是否都有東西要設定嗎?
有的話我是否要從頭來過呢! gikifk 發表於 2012-11-1 20:28 static/image/common/back.gif
甘大獲!
哈哈C兄,
我只好說一句"音響知識有限!" av_dom_c 發表於 2012-11-2 00:37 static/image/common/back.gif
多謝C兄回覆,
我突然想起上次 Set Audyssey 時,
Try to start again and check if it is muted/low volume. And the speaker / cable is working in other channel ? Any physical contact issue ? Just a wild guess. Hope this helps.{:8_386:}
If the problem still exists, may need to phone CS. Good luck. 插咪再set過. av_dom_c 發表於 2012-11-2 00:37 static/image/common/back.gif
多謝C兄回覆,
我突然想起上次 Set Audyssey 時,
師兄, 5.1 -> 7.1, 裸番隻咪咪出黎再set A\udyssey 喇!{:1_245:}
頁:
[1]