求救!!! VT30工程模式!
小弟頭先手㾗入左工程模式，再唔小心咁禁錯制，郁左入面既setting...{:6_200:}
請問有冇師兄有辦法回覆去defalt ? 或者可以影張相比我睇下原本個setting係點的嗎？？ 想請問點樣入工程mode Good Information by DNA
入工程模式方法
http://www.post76.com/discuss/attachments/forumid_5/1007141034291d91c2863ad91f.jpg
1.按住-/V鍵不放
http://www.post76.com/discuss/attachments/forumid_5/1007141034e75bb144e73ce1b7.jpg
More details, Please go this link
http://post76.hk/forum.php?mod=viewthread&tid=42585&extra=page%3D1&page=4
.
.
.
6.按住静音鍵(藍圈)3秒，就會出現使用時間和開關機次數
http://www.post76.com/discuss/attachments/forumid_5/100714104715a36bf6132d5a71.jpg
Press and hold the {VOL -} button ON THE PLASMA TV.
Then press the {INFO} button on the remote control 3 times.
"Start Adjustment Menu" message will be displayed followed
by the Service Menu after few seconds.
ADJUST {Picture Adjustment}
WB-ADJUST {White Balance Adjustment}
OPTION {Option Setting}
V-SUS {V-SUS Adjustment}
AGING
SRV-TOOL {Service Tool}
{1} & {2} buttons move through options
Press the {2} button once to select "SRV-TOOL".
Then press the {OK} button to access it.
Using the cursor keys, highlight the right side
of the last item "PTCT :00.00.00.00.00" :
Then press and hold the {MUTE} button for 3 seconds.
Time and Count will be displayed in red color:
__TIME = Hours : Minutes of operation.
COUNT = Times the Plasma was powered on.
To exit, unplug the power cable.
http://www.hometheatershack.com/forums/hdtv-video-displays-processors/23475-how-check-hours-used-your-plasma.html Thx Netmans 師兄 Netmans 發表於 2012-10-24 22:00 static/image/common/back.gif
Good Information by DNA
入工程模式方法
Thank you so much!
頁:
[1]