論壇 › HiFi音響 › 新手請教 KEF Q300 喇叭

kmr 發表於 2012-10-20 12:50

其實有冇說明書? 說明書實有講的

Scientist 發表於 2012-10-20 13:17

Ching can read the chapter about biwiring in the q300 manual, it tells u the usage of the bult-in jumper.
Tighten the knob means the the jumper is bridged for single wire connection. Loosen the knob means the jumper is unbridged for biwire connection.
This chapter should be read carefully to play the kef speakers safely.

izthat 發表於 2012-10-20 14:58

Scientist 發表於 2012-10-20 13:17 static/image/common/back.gif
Ching can read the chapter about biwiring in the q300 manual, it tells u the usage of the bult-in ju ...

Yes, I read the manual already but just don't know the meaning and usage of biwire connection, so see if anyone can explain more to me. {:6_195:}

Scientist 發表於 2012-10-20 21:17

izthat 發表於 2012-10-20 14:58 static/image/common/back.gif
Yes, I read the manual already but just don't know the meaning and usage of biwire connection, so...

{:6_193:} If u use single wire and no jumper, u can just simply keep the knobs turned in.

成成 發表於 2012-10-20 23:50

簡單啲講
擰起就飛起內部jumper,可能怕我啲大頭蝦,飛起銅片,第日想搵返都唔知放咗喺邊
唔飛起jumper,再外接jumper唔會燒架,又唔係正負搭埋

kmr 發表於 2012-10-21 00:14

成成 發表於 2012-10-20 23:50 static/image/common/back.gif
簡單啲講
擰起就飛起內部jumper,可能怕我啲大頭蝦,飛起銅片,第日想搵返都唔知放咗喺邊
唔飛起jumper,再外接 ...

師兄，燒就應該不會了，你對，但如果bi-amp兩條正放在一起，會有分別麼？{:6_141:}

成成 發表於 2012-10-21 17:24

kmr 發表於 2012-10-21 00:14 static/image/common/back.gif
師兄，燒就應該不會了，你對，但如果bi-amp兩條正放在一起，會有分別麼？...

咁又未試過
不過以前試過,行bi-wire,唔記得蚊走jumper,但啲聲爽快得嚟能量強好多

Scientist 發表於 2012-10-21 18:09

成成 發表於 2012-10-21 17:24 static/image/common/back.gif
咁又未試過
不過以前試過,行bi-wire,唔記得蚊走jumper,但啲聲爽快得嚟能量強好多 ...

{:6_121:}circuit not shorted?!

jason1969 發表於 2012-10-22 08:56

本帖最後由 jason1969 於 2012-10-22 08:58 編輯

izthat 發表於 2012-10-20 14:58 static/image/common/back.gif
Yes, I read the manual already but just don't know the meaning and usage of biwire connection, so...

Very simple, if you think about bi-wire KEF Q300 built-in jumper both unscrews it, please find scenario as below.

You can buy Bi-wire speaker cables 2 -> 4

izthat 發表於 2012-10-22 14:03

jason1969 發表於 2012-10-22 08:56 static/image/common/back.gif
Very simple, if you think about bi-wire KEF Q300 built-in jumper both unscrews it, please find sce ...

Thank you very much{:6_195:}
I want to know that do Bi-wire speaker cables 2 -> 4 better then normal 2 > 2 or just the same? {:6_229:}

查看完整版本: 新手請教 KEF Q300 喇叭