各位CHING好熱心幫小妹2號, 好感激呀 {:6_128:}
我諗應該無插錯位, 得一個WOFFER位可以插, 但就無試過入去Setting到, 等我今晚番去試下各位CHING既建議, 如果吳得到時又要再相求...
至於SPEAKER 我唔係用緊CHING個款AAD咁高MODEL, 我用緊AAD IQ 5.1炸 {:6_181:}
http://www.philjonespuresound.com/products/124/photos/216.jpg
metalgirl 發表於 2012-10-9 10:19 static/image/common/back.gif
各位CHING好熱心幫小妹2號, 好感激呀
我諗應該無插錯位, 得一個WOFFER位可以插, 但就無試過入 ...
呢套喇叭都唔平又靚女！{:6_208:}
都係比人看看
都係比人看看
Bee 發表於 2012-10-9 11:26 static/image/common/back.gif
都係比人看看
小妹.....都係比人看乜{:6_141:} {:6_141:} ？？
点解吾開Test Tone去試每個Channel?
mrpost76 發表於 2012-10-9 17:00 static/image/common/back.gif
点解吾開Test Tone去試每個Channel?
請問如何開 test tone?? 我新手入門好多野都唔識, 要ching 指教了~{:8_387:}
本帖最後由 mrpost76 於 2012-10-10 00:17 編輯
小妹以TX-NR809, Speaker Setup > Level Calibration,
Here you can adjust the level of each speaker with the
built-in test tone so that the volume of each speaker is the
same at the listening position.
■Left, Front Wide Left, Front High Left, Center*1,
Front High Right, Front Wide Right, Right,
Surround Right, Surround Back Right,
Surround Back Left, Surround Left
以NR509 中文使用手冊,(http://www.hk.onkyo.com/support/searchresult?code=TX-NR509) page 42
本帖最後由 jason1969 於 2012-10-9 17:53 編輯
metalgirl 發表於 2012-10-9 17:06 static/image/common/back.gif
請問如何開 test tone?? 我新手入門好多野都唔識, 要ching 指教了~
ONKYO 509
You can use Audyssey setup
Using the Automatic Speaker Setup
Please find usual manual refer to page 34{:6_210:}
http://www.hk.onkyo.com/support/searchresult?code=PR-SC5509
