Cyrus Mono X 200 Power Amp
本帖最後由 jason1969 於 2012-8-29 09:22 編輯有冇師兄用緊D部 Cyrus Mono X 200 Power Amp推前級呀{:6_211:} d部嘢要3皮幾呀.
Technical Information
Construction
Enclosure: Cyrus Inverted die-cast chassis
Material: Lightweight non-magnetic alloy
Electrical
Inputs:
RCA phono or XLR balanced
12V Trigger
RS232
Outputs:
Bi-wire Loudspeakers (BFA terminals)
RCA Chain out
RS232
Power Supply:
Custom wound 200VA Toroidal transformer
Communications:
MC-BusTM System Bus
RS232
Specifications
Continuous Power: 150W (into 8 Ohms), 240W (into 4 Ohms)
Burst Peak Power: >1500W
Distortion: <0.004%, (1kHz into 8 Ohms)
Frequency Response: -3 dB at 0.5Hz and 300kHz
Slew rate: 700V/S (filters bypassed)
Max output Current: 80 Amps peak to peak
Sensitivity (RCA input): 380mV (for 50W into 8 Ohms)
Sensitivity (RCA input): 660mV (for 225W into 8 Ohms)
Sensitivity (BAL input): 775mV (for 50W into 8 Ohms)
Sensitivity (BAL input): 1.3V (for 225W into 8 Ohms)
Input impedance: 47kΩ (RCA), 20kΩ (BAL)
Chain Output voltage: 660mV (for 660mV RCA or 1.3V BAL input)
S/N ratio: 114dBA
Dimensions (H x W x D): 73 x 215 x 360 (mm), 2.8 x 8.4 x14.1 (inches)
Weight: 5.5kg
Finish: Quartz or Brushed Black 本帖最後由 jason1969 於 2012-11-16 23:08 編輯
有冇師兄用緊黎部嘢Cyrus Mono X 200 Power Amp玩後級推座地喇叭{:6_229:}
頁:
[1]