論壇 › DIY分享 › 摩改 BDP 讀碟王

billymud 發表於 2012-7-29 01:30

回復 10# djaddy
may be u could ask VDigi for a spec sheet & circuit schematic for detail.{:1_262:}
while the OSC is next to the chip, is it hot ?

djaddy 發表於 2012-7-29 02:14

回復 11# billymud

I can't find the specs online. I dun think Vdigi will give that info out. I haven't tested the heat from the OSC when the bdp is on. Pls share your thoughts.

billymud 發表於 2012-7-29 11:40

回復 12# djaddy


At least, replace the OSC with a +\- 1 ppm device.
Add 12Vdc cooling fan running at 6V.
呵呵

djaddy 發表於 2012-7-29 11:54

回復 13# billymud


Where to buy the +\- 1 ppm device?

billymud 發表於 2012-7-29 12:04

回復 14# djaddy
師兄、米玩我喇，你DIY 底子厚，可能唔記得櫃桶底有粒 0.01ppm 喎？！.....你check check 先唄。

djaddy 發表於 2012-7-29 12:34

回復 15# billymud

No la, I am still learning. Some parts I dunno where to buy. Macau is a sucky place when it comes to DIY.

billymud 發表於 2012-7-29 14:06

回復 16# djaddy
get it from Japan,
or
Alman is your friend.....
{:1_245:}
    http://www.post76.com/discuss/viewthread.php?tid=126518&extra=page%3D1

djaddy 發表於 2012-7-29 16:47

回復 17# billymud


Something like this？
a.m.taobao.com/i12225497149.htm

billymud 發表於 2012-7-29 22:56

本帖最後由 billymud 於 2012-7-29 23:17 編輯

回復 18# djaddy
what's it ? ........dead link !

djaddy 發表於 2012-7-29 23:17

高精度温补晶振TCXO-0.1ppm 可以定制
http://q.i02.wimg.taobao.com/bao/uploaded/i2/T1QFGjXhNtXXas3XA9
http://item.taobao.com/item.htm?id=12225497149

回復 19# billymud

查看完整版本: 摩改 BDP 讀碟王