論壇 › HiFi音響 › Roksan k2 amp 怎樣駁及set AV bypass

heven 發表於 2012-7-18 00:35

Roksan k2 amp 怎樣駁及set AV bypass

如題,請各位師幫忙,因為本manual 太精簡{:1_336:}

cheapching 發表於 2012-7-18 11:21

回復 1# heven
由 av amp個 pre out 用 rca 線駁到圖中左邊第二個 rca 輸入，那 rca 輸入位右邊有一個細細個‘掣’，要撥到 bypass（一邊bypass、一邊video），那就完成！！
以後睇戲時，只要在遙控選擇video就得，記得經重新用 av amp做一次set up（用收音咪）！！

heven 發表於 2012-7-18 13:50

本帖最後由 heven 於 2012-7-18 13:52 編輯

回復heven
由 av amp個 pre out 用 rca 線駁到圖中左邊第二個 rca 輸入，那 rca 輸入位右邊有一個細細個 ...
cheapching 發表於 2012-7-18 11:21 http://www.post76.com/discuss/images/common/back.gif



Thanks a lot for your advice, the "video input" does not connect any RCA cables?
And please advise which brand rca cables better for if I am using yamaha AV amp.
Last one, the K2 whether can in standby mode, doesn't switch off the main power every time?

ANWKLO 發表於 2012-7-27 18:55

Thanks a lot for your advice, the "video input" does not connect any RCA cables?
And please advi ...
heven 發表於 2012-7-18 13:50 http://www.post76.com/discuss/images/common/back.gif

Press the power button for 2 seconds will switch from ON to Standby mode (light from Red to Green)

If unattended for a long period (Going on a short break, holidays etc.) the Mains power should be switched OFF {:1_245:}

heven 發表於 2012-7-27 22:26

Press the power button for 2 seconds will switch from ON to Standby mode (light from Red to Green) ...
ANWKLO 發表於 2012-7-27 18:55 http://www.post76.com/discuss/images/common/back.gif
Thanks a lot. 我想問你用AV bypass 時, SP有冇boo聲,如果有怎樣解決{:6_191:}

查看完整版本: Roksan k2 amp 怎樣駁及set AV bypass