回復 20# Wilmer威馬
Got it. Thx. ching
同支臂擔到幾重 o既頭有關
Wilmer威馬 發表於 2012-6-13 14:47 http://www.post76.com/discuss/images/common/back.gif
我搵到佢係咁寫, 但係無specify 輕定重...
• As an optional extra, the turntable is supplied with Ortofon 2M Red MM-cartridge fitted.
• The headshell and armtube are fashioned from a single piece of carbon-fibre.
• Conical armtube avoids standing wave reflections.
• Inverted tonearm bearing comprises four hardened stainless tips in ABEC7 spec ballraces.
• Rings provide very solid arm bearing housings. The outside ring is open to avoid resonances.
• Design of counterweight effectively counteracts unwanted resonances.
• The counterweight supplied is suitable for cartridges weighing between 6 - 10g. Alternative counterweights for cartridges weighing between 11 - 15g, 8 - 11g or 5 - 8g are available as an accessory part.
• Counterweight shaft lowered to record level reduces cantilever forces and dynamic wow when playing warped records.
• Solid armbase permits accurate height adjustment of armtube and VTA (vertical tracing angle).
• Single-screw fixing of armtube allows rotation for easy adjustment of needle azimuth despite fixed headshell.
• Silicone-damped armlift can be adjusted to suit working height of the arm.
• The internal wiring consists of flexible high-purity copper from the headshell right through to the gold-plated phono sockets.
我搵到佢係咁寫, 但係無specify 輕定重...
• As an optional extra, the turntable is supplied with...
wwwbrian 發表於 2012-6-13 15:27 http://www.post76.com/discuss/images/common/back.gif
講左啦：
The counterweight supplied is suitable for cartridges weighing between 6 - 10g. Alternative counterweights for cartridges weighing between 11 - 15g, 8 - 11g or 5 - 8g are available as an accessory part.
即係跟中間果個，你最好訂 11-15g 果個。
一般入门盘，大多 low mass 臂， 夹mm头适合。mc 头好唔好声，大多取决 mc 放大果部份，如果冇靓 mc牛或 mc head amp, 用靓 mm 头好过。 mc 牛我有六对，由四百到二千美金，是旦用一个都靓声过直入 herron mc input, mc 真系好烦架。
做乜转哂简笔字？？
本帖最後由 alibabar 於 2012-6-13 21:14 編輯
回復 20# Wilmer威馬
Dual CS 455-1 {:6_190:}
http://www.hifi-phono-house.com/product_info.php?products_id=4163&language=en
請問臂重同針壓分別要較幾多呢？
回復Wilmer威馬
Dual CS 455-1
請問臂重同針壓分別要較幾多呢？ ...
alibabar 發表於 2012-6-13 21:06 http://www.post76.com/discuss/images/common/back.gif
基本主冇頭好換，用死一世 Ortofon OM 系列咁濟。。。。
針壓 1.75g：
http://www.turntableneedles.com/Ortofon-OMB-10_p_2999.html
POP／ROCK OM 系都 OK 啦
回復 26# Wilmer威馬
Thanks ching {:6_190:}
各位師兄,
有冇邊度多唱針賣?
同埋有冇d 2k 樓下既 mm 唱針介紹?
謝謝
hanschung 發表於 2012-6-13 08:56 http://www.post76.com/discuss/images/common/back.gif
在這裡買過唱針, 好多選擇, 大眾化 {:1_245:}
http://www.mantra-audio.co.uk/
這個網站未買過.
http://www.needledoctor.com/Online-Store/Phono-Cartridges
