pac 發表於 2012-6-12 11:38

有關 JVC E-SHIFT請教

請問各CHING有沒有以較自已家中的JVC投影機究景有沒有開了E-SHIFT功能呢?
我用緊X70,問過代理用DEMO MODE開關E-SHIFT比較過完全看不出分別,也不知是否有E-SHIFT功能,各CHING可有辨法?
以前用X3,當然X70在對比度上會高很多,我是看得出的,但解像度方面就看不出分??了

breadvan 發表於 2012-6-12 11:59

回復 1# pac

I only have the 30, but some forum said you can turn on/off eshift by pressing right, left, right, left and it brings up the word Demo in the corner, and an additional left or right (doesn't matter which), and it turns eshift on and off.The setting goes back to default when you turn the projector back off and on, have you tried that?

pac 發表於 2012-6-12 12:37

回復pac

I only have the 30, but some forum said you can turn on/off eshift by pressing right, le ...
breadvan 發表於 2012-6-12 11:59 http://www.post76.com/discuss/images/common/back.gif
THX,已試過了,就是這樣做,根本無論ON或OFF都是一樣

breadvan 發表於 2012-6-12 13:03

有關 JVC E-SHIFT請教

Were you using any motion setting ? I heard Mode 1 & 2 and 3D automatically disable eshift


- 發送自我的 iPhone 大板凳應用

pac 發表於 2012-6-12 13:17

Were you using any motion setting ? I heard Mode 1 & 2 and 3D automatically disable eshift


- 發送 ...
breadvan 發表於 2012-6-12 13:03 http://www.post76.com/discuss/images/common/back.gif


    用movie mode. Thx

breadvan 發表於 2012-6-13 12:41

回復 5# pac

Sorry I meant if you were using any Clear Motion Drive (CMD) Mode 1 or 2.

pac 發表於 2012-6-13 13:14

回復pac

Sorry I meant if you were using any Clear Motion Drive (CMD) Mode 1 or 2.
breadvan 發表於 2012-6-13 12:41 http://www.post76.com/discuss/images/common/back.gif

是OFF的,今天有JVC人員檢查後也發覺看不出有分別,要待他回公司再聯絡

hellodanny 發表於 2012-6-13 14:40

回復 4# breadvan


Hello Breadvan hing,
I just brought the X30 yesterday, may I know where I can get the ceiling mount in what price should is cost???
As I saw onenamed "Carxol" withdark colour (max. 30 kg) in Duck Street... costaround HK$250.00...
But not sure if this matched to the size of X30 ??

breadvan 發表於 2012-6-14 13:32

回復 8# hellodanny

Hello Danny to be honest I use a projector elevator so have not much info on mount but I did check duck street out, most of the mount arm were not long enough and looked very flimsy so please make sure they are strong enough in the long run.I also made 2 acrylic boards for my purpose, like racingboy ching over @ hometheater.hk

Sorry cannot be more specific on this.

breadvan 發表於 2012-6-14 13:34

回復 7# pac

Sorry to hear that hopefully after servicing you will see the difference.
頁: [1] 2
查看完整版本: 有關 JVC E-SHIFT請教

重要聲明:本討論區是以即時上載留言的方式運作,Post76玩樂討論區對所有留言的真實性、完整性及立場等,不負任何法律責任。而一切留言之言論只代表留言者個人意 見,並非本網站之立場,讀者及用戶不應信賴內容,並應自行判斷內容之真實性。於有關情形下,讀者及用戶應尋求專業意見(如涉及醫療、法律或投資等問題)。 由於本討論區受到「即時上載留言」運作方式所規限,故不能完全監察所有留言,若讀者及用戶發現有留言出現問題,請聯絡我們。Post76玩樂討論區有權刪除任何留言及拒絕任何人士上載留言 (刪除前或不會作事先警告及通知 ), 同時亦有不刪除留言的權利,如有任何爭議,管理員擁有最終的詮釋權 。用戶切勿撰寫粗言穢語、誹謗、渲染色情暴力或人身攻擊的言論,敬請自律。本網站保留一切法律權利。權利。