gikifk
發表於 2012-5-13 13:03
都好頭痛{:6_168:}
leomatrix
發表於 2012-5-16 13:10
回復 1# applep800
Ching 部 XPA-5 找到原因未?
tinghai
發表於 2012-5-16 15:02
From XPA-5 manual:
No Sound (from one or more speakers connected to the amplifier)
•Speaker cables may have come undone. Turn off your system and check the cables, tighten the amplifier and speaker binding posts.
•Damaged audio cable.
•The preamplifier volume level is low for the channels concerned. Recheck the preamplifier calibration procedure.
•A preamplifier Mute switch may be on, an external processor loop or a tape monitor loop is engaged.
•Check that your preamplifier or source is running the correct surround mode. Maybe it is set for 2‐channel stereo when you were expecting 5.1 surround sound.
•Check if any missing channels have been turned off in a preamplifier setup menu. For example, the center amplifier channel will not receive a signal if the preamplifier has been set to “Phantom”.
•Check main power switch to make sure that it is in on position (1).
•An internal fuse on the unit may have blown. Contact Emotiva Support for assistance.
ropresident
發表於 2012-5-16 15:24
多口問句, 其實部xpa-5 係唔係好易出問題呢?
小弟見好多師兄都不停求救, 咩問題都有咁.
小瑟
發表於 2012-5-18 08:30
多口問句, 其實部xpa-5 係唔係好易出問題呢?
小弟見好多師兄都不停求救, 咩問題都有咁. ...
ropresident 發表於 2012-5-16 15:24 http://www.post76.com/discuss/images/common/back.gif
大家自己買既我唔知, 不過經76團購既冇100都有80部, 有壞機係好正常呢, 不過我攪果批面板LED有問題就係比較多, 好似有3個師兄係咁, 之後都有D師兄係咁.
ropresident
發表於 2012-5-18 09:15
本帖最後由 ropresident 於 2012-5-18 09:16 編輯
回復 35# 小瑟
事關小弟都要開始考慮下av呢邊要點搞了, 諗得黎都差唔多時間要轉.
先唔好理壞既問題, 而家係換部好d既int一件過, 還是前後呢? 效果可以差幾遠呢? 但係買多件就要多d位, 仲要多幾條線......
applep800
發表於 2012-5-18 12:03
Oh, I think XPA-5 is good.
As of my usage, it is the first time having problem.
Besides, the price performance on it is really high.
PP-HK
發表於 2012-5-18 13:48
我覺得都係check check機內fuse好d。
ruri
發表於 2012-5-29 23:32
解決左未?
ice1chan
發表於 2012-6-1 13:09
Any good news?