論壇 › HiFi音響 › HF & LF 及 jumper 方向

charliey 發表於 2012-5-4 16:14

HF & LF 及 jumper 方向

本帖最後由 charliey 於 2012-5-4 16:17 編輯

現時駁法如下:


問題: 想將右邊白色(+)喇叭線轉去HF位, 咁條右邊jumper要唔要掉轉頭還是保持不變?

sungyue 發表於 2012-5-4 16:26

要{:8_393:}

sungyue 發表於 2012-5-4 16:32

你個箭咀方向錯了,+駁LF應是LF流向HF
反而-回路是HF流向LF正確

charliey 發表於 2012-5-4 16:41

你個箭咀方向錯了,+駁LF應是LF流向HF
反而-回路是HF流向LF正確
sungyue 發表於 2012-5-4 16:32 http://www.post76.com/discuss/images/common/back.gif


    唔好意思 ... 唔係好明... {:6_122:}

Wilmer威馬 發表於 2012-5-4 21:56

唔好意思 ... 唔係好明...
charliey 發表於 2012-5-4 16:41 http://www.post76.com/discuss/images/common/back.gif

Einstein 發表於 2012-5-4 22:53

回復 5# Wilmer威馬


    {:8_389:}

sungyue 發表於 2012-5-4 23:01

Wilmer威馬 發表於 2012-5-4 21:56 http://www.post76.com/discuss/images/common/back.gif


    我幾時都話你係得嫁{:6_193:}

charliey 發表於 2012-5-5 14:59

Wilmer威馬 發表於 2012-5-4 21:56 http://www.post76.com/discuss/images/common/back.gif

   thanks thanks {:1_351:}

!替天行道! 發表於 2012-5-5 15:08

本帖最後由 !替天行道! 於 2012-5-5 15:19 編輯

現時駁法如下:


問題: 想將右邊白色(+)喇叭線轉去HF位, 咁條右邊jumper要唔要掉轉頭還是保持不變? ...
charliey 發表於 2012-5-4 16:14 http://www.post76.com/discuss/images/common/back.gif
ching, there is an issue with elac speakers terminals, the configuration of the speaker posts do not allow you to use jumpers in flexible directions. if you use banana at bottom, you cannot use spade plug at top.

i use elac bs244, i have banana going into HF, then spade from HF to LF in spade.

the design of elac speaker terminal is very bad. unless you have a good amp to let you run biwire right from the amp terminal.

http://www.post76.com/discuss/attachments/forumid_52/120328231394c77ceda0ed4e11.jpg
http://www.post76.com/discuss/attachments/forumid_52/12032823238bb9fe55d03fc54b.jpg

VT_VT 發表於 2013-2-3 23:28

!替天行道! CHING
Could you tell me where to buy your jumper? And how much they are?
Thank you very much!!

查看完整版本: HF & LF 及 jumper 方向