VT20 James Cameron Avatar 3D Settings問題(歐洲版 & 亞洲版)
由於Panasonic website remove 咗james cameron 俾VT20建議o既avatar 3D settings幾經辛苦,終於都搵到其他地方有backup到(多謝fmk888 & namdaor ching相助)
不過都有其他疑問
原來有分到歐洲版/亞洲版
想請問有冇ching 當初有冇backup到亞洲版settings? (搵咗好耐都搵唔到亞洲版settings backup){:6_168:} {:6_168:} {:6_168:}
其實歐洲版同亞洲版個settings係咪一樣?
因為跟過歐洲版o既數值去set 效果麻麻..
謝謝
{:6_162:} {:6_162:} {:6_162:}
亞洲版原link:
http://panasonic.net/avc/viera/asia2010/avatar/index.html
歐洲版原link:
http://panasonic.net/avc/viera/us2010/avatar/index.html
歐洲版settings backup:
Switch “Advanced (isfccc)” to ON.
Set the “Viewing Mode” to “Professional 1″.
Set the “Contrast” to “48″.
Set the “Colour” to “33″.
Set “White Balance” to the following values:
- Move the scale of “R-Gain” 10 times to the right.
- Move the scale of “G-Gain” 8 times to the left.
- Move the scale of “R-Cutoff” 2 times to the right.
- Move the scale of “B-Cutoff” 1 time to the right.
Set “Colour Management” to the following values:
- Move the scale of “R-Hue” 3 times to the right.
- Move the scale of “G-Hue” 4 times to the left.
- Move the scale of “R-Saturation” 3 times to the right.
- Move the scale of “G-Saturation” 11 times to the right.
- Move the scale of “B-Saturation” 8 times to the right.
Set “Gamma” to “2.4″.
Switch “24p Smooth Film” to OFF.
Switch “3D 24p Film Display” to OFF. Push! Push! Push! 無人知......
{:6_126:}{:6_126:}{:6_126:}
頁:
[1]