AET PSE-320HR IEC
請問各 c hing,AET PSE-320HR IEC 尾插入線蕊位係咪大個瑞士尾插4871,{:6_183:} 因二手收咗絛305,原先有5266i及4871,(諗住唔好浪費)点知線蕊入唔哂到4871{:6_203:}考慮買AET PSE-320HR IEC,我見秋記都用,但吾知自己做吾做到,(如果入線蕊位大個4871,我諗都ok,因只差少少位就得{:6_183:} ,305好似都有4mm粗,如果吾得就轉用oyaide 037iec
各位請指教一吓,thanks{:6_195:} 既然你頭用5266I,IEC尾咪配返320I咪一套law! 既然你頭用5266I,IEC尾咪配返320I咪一套law!
KING 發表於 2012-1-30 01:32 http://www.post76.com/discuss/images/common/back.gif
我諗住換哂頭尾,5266i另有用途 我諗住換哂頭尾,5266i另有用途
fei310 發表於 2012-1-30 01:38 http://www.post76.com/discuss/images/common/back.gif
Oh!I see,咁咪037頭尾,一係AET頭尾一套過law! 但aet,那隻iec尾插入線蕊位是否大過瑞士4871? 本帖最後由 KING 於 2012-1-30 02:01 編輯
但aet,那隻iec尾插入線蕊位是否大過瑞士4871?
fei310 發表於 2012-1-30 01:57 http://www.post76.com/discuss/images/common/back.gif
其實你係講入線位個大O,定係入面接線位個細O呢?
係,入面接線位個細O,thanks!!{:6_195:} 係,入面接線位個細O,thanks!!
fei310 發表於 2012-1-30 02:01 http://www.post76.com/discuss/images/common/back.gif
入面接線個細O就難攪D啦,我張相果條線係4030黎,都係入唔到個細O位,我都係換左320I先入到!
AET果隻IEC我未用過真係唔岩講得唔得! 回復 8# KING
唔緊要,thank you! king sir,我揾日出去睇吓價再決定 aet or 037,頭尾 回復 9# fei310
Aet 尾 同8471差唔多 for305 都幾免強，
無記錯廠線好似用oyaide 頭尾。 容易入好多
頁:
[1]
2