家庭影院發問
amp606 5.1喇叭canton120mx說明書:crossove:this control relates to the upper cut-off frequency reproduced by your sub-w(65hz).all frequencies above the set level will be cut off by 12 or 24 db/octave(high cut) and not reproduced.the level is primarily based on the lower cut-off frequency of the other loudspeaker in your system
volume:the vol control allows you to change the volof your sub-w andtherefore the intensity of the low bass reproduction (0db)turning to the right increases the vol and turning to the left reduces the vol.use the vol control to customise the vol of the canton sub-w to match the other loudspeaker in your system.
sub-w後面有兩按鈕 crossover(hz) 65708095110130150
vol(db)-80-18-12-60+6+9
我設+6db 80hz,跟著音場設定
FL3m(-4db) C2.7m(-6db) FR2.7m(-5db) SL1.2m(-6db) SR1.5m(-4db) sub-w4.5m(-15db)
150hz 150hz 150hz 100hz
咁sub-w按鈕需要更改嗎???
重有無其他需要再更改??? "sub-w後面有兩按鈕 crossover(hz) 65708095110130150
vol(db)-80-18-12-60+6+9
我設+6db 80hz,跟著音場設定
FL3m(-4db) C2.7m(-6db) FR2.7m(-5db) SL1.2m(-6db) SR1.5m(-4db) sub-w4.5m(-15db)
150hz 150hz 150hz 100hz"
因為你音場設定為 150 hz 和 100 hz, 即 av-amp 只送出 150 hz 或100 hz 以上訊號至 FL, C FR , ... 等。
為了方便設定, 建議 統一所有音場設定, 例如 : 全部設定為 100 HZ。
然後在你的SUBWOOFER 設定為 110 HZ ( >= 100 HZ) 試試看。
SUBWOOFERVOL 建議先 SET 0 db, 然由 av-amp 調較輸出, 控制聲量, 各個聲道的輸出都可由 av-amp 調較。
希望你成功 ！
頁:
[1]